$398.00 $998.00 | $68.00 $136.00 | $19.00 $29.00 |
This model is a seamless embedded tire pressure monitoring dedicated for special vehicles. There are Toyota series, Mazda series, Honda series, richan series,Models of other brands are not applicable for the time being, you can contact customer service to purchase general tire pressure monitoring.
Toyota series applicable models are as follows(Suitable for new and old models):Corolla, Camry, Reiz, Prado, Yizhi, Highlander, RAV4,Prius, Land Cruiser, Cruiser
Question one:Are tire pressure batteries durable?
Answer: Under normal circumstances, the battery with the built-in sensor can be used for 5 years.
Question two:Is it easy to install?
Answer: Display installation: Find a spare button of the original car to remove and install it, 2 wires, one is connected to the ground wire, the other is connected to the ACC wire or any circuit that can be controlled by the car key. Sensor installation: The external sensor can directly replace the valve, and the built-in sensor can go to the repair shop to replace the valve.
Question three:After installation, if the front and rear wheels are exchanged, do I need to remove the sensor and reinstall it on the corresponding tire?
Answer: There is no need to dismantle the sensor and reinstall it, just follow the instructions and re-code after the tire is replaced
Question four:The corresponding value is not displayed after installation?
Answer: After the product is installed, the value sometimes cannot be immediately matched. You only need to drive the car out for a few laps to match the code and display the corresponding value.
Question five:Is it useful to install tire pressure?
Answer: The main function of tire pressure is to prevent trouble before it happens. Don''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''t wait until you want to use it before remembering it. It may be too late by then. Tire pressure is mandatory installation in Europe and the United States, and all cars that leave the factory must be installed before they can be sold.
Question six:How to set the tire pressure value suitable for your vehicle?
Answer: Each model manufacturer has a recommended tire pressure value when it leaves the factory. You can see this value by looking at the user manual or tire pressure indicator. Generally, the tire pressure indicator is located at the door frame of the driver''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s door or inside the fuel tank door, and you can see it after opening the door or fuel tank door.